Speaker diameter: 50mm
In the headphones, the triangles on the cups and the microphone tip are illuminated: According to the manufacturer, thanks to this design, anatomical features are better taken into account, which reduces pressure on the head, making the stay in the headphones more comfortable.
The declared characteristics of the Glary Alpha headphones:
Bottom of the headband clips are lined with soft fabric.
A standard 3.5mm AUX jack is used to connect to a PlayStation, XBOX or smartphone.
Here it is
You can enable/disable the microphone and adjust the volume. I couldn’t remove the ear pad to study the speakers – it is fixed quite firmly, but I didn’t cut it, because I promised my son headphones to replace his old EACH G2000 from this review. Impedance: 32 ohms ± 3 The thickness of the shock absorbers is also quite large, so that the auricle is not pressed against
speaker grilles, which are covered with just a thin fabric of ear cushions. The Reuleaux triangle is highlighted around the logo. Microphone impedance: 2.2kΩ
The microphone is fixed with one screw. This is how the headphones look on the head:

The connectors can be identified by the color of the pins (red for the microphone and green for the headphones) and are also labeled with the appropriate pictograms. The USB connector is used to power the backlight.
Rear view.
Headphones themselves, front view: The cups are thus oblong in shape, which is naturally more comfortable for the ears than if they were round. Remote dimensions (L x W x H) – 6 x 3.3 x 1.5 cm. In part, this can be reset to the fact that Sades uses its own sound card, but the speakers are also clearly worse there, I felt this even despite the almost complete lack of musical ear. In a sitting position, this is approximately near the hip, which means that it will not interfere and at the same time it will be comfortable to use. Subjectively, my fairly large ears (about 7 cm high from earlobe to top) fit inside the cup completely and comfortably. The actual length of the cable corresponds to the declared one – 2.2 m, and if you count it together with an adapter for connecting to a PC – 2.4 m. Can be unscrewed to view internal construction: Microphone sensitivity: 42±3dB This is of course my subjective impression, so I invite you to read the review so that you can also form your opinion about them.
Side view: The seller took care of additional packaging, so that the original headphone box was not damaged during shipment.
I liked the sound in the headphones.
All cable connections to the headphones are protected against bending. Unlike most headphones with a double headband, here the internal, fixing headband is not solid, but consists of two halves that can deviate from the horizontal axis by up to 45 degrees.
In addition to the headphones themselves, there was only a multilingual instruction (Russian is available) and a warranty card. It is clearly better than in the Sades A6, which I also recently got to test. Maximum input power: 30mW
The weight of the headphones without cable is 317 g. Cup size – 11.5 x 9.5 cm with a width of 2.5 cm and the same thickness.
The middle of the cups is made of glossy plastic with a logo in the middle.
This, to me, is a significant pole, because the previous headphones came from China in badly dented boxes, which caused serious concerns for the safety of the contents.
Description of the headphones on the back of the box: The cable itself is the most ordinary, without the now fashionable fabric braid. Of the gaming headphones that have passed through my hands, I liked these the most. The remote control is located at a distance of 55 cm from the cup if you count along the cable. As for me, pretty good headphones with well-thought-out ergonomics and good build quality, which is the main difference between all Tronsmart products. By the way, they have been working properly for two years now, but the child is not satisfied with the fact that the microphone can only be adjusted in the vertical plane.
The backlight itself is absolutely not intrusive, constant, without overflows, flashing and other visual effects that hurt the eyes. Weight: 320±5g Cable length: 2.2 m Sensitivity: 101 dB ± 3 dB

Glary Alpha gaming headphones by Tronsmart

The corrugated base allows you to easily and stably fix the microphone in the selected position. Almost symmetrical. For a PC, an adapter is provided that separates the headphone input and microphone output into separate 3.5 mm jacks.
The ear pads are made of soft leatherette and are quite large in themselves.
The split inner headband immediately catches the eye. However, it can be completely removed using the switch on the remote control.
The microphone cable is made in the form of a corrugated metal tube in a transparent silicone casing.

Frequency range: 20Hz-20000Hz The outer headband is assembled from two metal brackets in rubberized casings. The position is mainly controlled by bending the cable, but it is also possible to adjust the position of the microphone around its axis within 90 degrees.